Desktronic Home Pro (Black, Electric Height-Adjustable)

Electric Standing Desk Frame

From: Desktronic

The Desktronic Height-Adjustable Desk Frame is a sit-stand desk base built for daily use in a home office or workplace. It uses a dual motor system that runs under 40 dB, quiet enough for video calls or late-night work. The frame moves at 50mm per second, switching from sitting to standing height in under 12 seconds - twice the speed of most competing desks.

Built from 90mm x 60mm x 3mm alloy steel with wide T-feet and stability struts, the frame is up to 60% thicker than an average adjustable desk. It adjusts between 62cm and 128cm, fitting people of different heights, including school-age children. The touchscreen controller stores 3 height presets and includes USB and USB-C ports for charging devices while you work.

With a maximum load capacity of 160kg, this frame handles multiple monitors, a PC tower and other office kit without strain. Anti-collision technology reverses the desk slightly if it hits an obstacle, protecting both desk and belongings.

Check Price

Amazon UK

Product Features

Dual Motor System - The Desktronic frame uses two motors working together rather than one. This gives faster height changes (12 seconds) and reduces strain on each motor individually, which should extend the working life of the mechanism compared to single-motor desks. 160kg Load Capacity - Most electric desks max out around 80-100kg. This frame handles 160kg, so a heavy tabletop, dual monitor arms, a desktop PC and books can all sit on it at once without triggering excess motor wear or sagging over time. Stability Struts - Steel struts replace the usual lower crossbar found on cheaper desks. This frees up leg room underneath while still stopping side-to-side wobble, even when the desk is raised to its full 128cm height.

Touchscreen Controller with Memory - Rather than holding a button until you reach the right height, you set 3 presets once and tap to recall them. This saves time if multiple people share the desk or if you switch between sitting and standing often through the day. Anti-Collision Detection - If the desk meets an obstacle while moving - a drawer left open, a chair pushed too close - it reverses slightly rather than continuing to push. This protects the desk frame, motor and whatever it has struck. Integrated USB/USB-C Charging - The controller panel has both USB-A and USB-C ports built in. Phones, tablets and other devices charge directly from the desk without needing a separate charging block plugged into a wall socket.

FAQs

What tabletop sizes fit this desk frame?

The frame fits tabletops between 110cm and 220cm in length and 60cm to 100cm in width. If you already own a tabletop within these dimensions, you can mount it directly onto the Desktronic frame rather than buying a whole new desk.

How much weight can the desk hold?

The frame supports up to 160kg. This covers a heavy solid wood tabletop plus monitors, a PC tower and other equipment. It's higher than most competing electric desks, which typically cap out around 80-100kg.

How long does assembly take?

Reviewers report assembly times ranging from 20 minutes to around an hour, depending on experience. The desk comes with all necessary tools and instructions. One person can assemble it, though the manufacturer recommends two people given the frame weighs around 26kg on its own.

Is the motor actually quiet?

Yes. The dual motor system operates under 40 dB. Multiple reviewers who watched demo videos beforehand expecting noise found the desk far quieter in real use than it appeared on video.

What is the height range?

The frame adjusts from 62cm to 128cm. Actual minimum and maximum height will vary slightly depending on your tabletop's thickness. One reviewer using a 20mm top found their range was 63cm to 128cm.

Does it fit shorter people?

People under 165cm tall may find the minimum sitting height still too high and might need a footrest. One reviewer at 168cm found 66-68cm ideal for sitting and 96cm for standing, both within the desk's range.

What happens if the desk hits something while moving?

The anti-collision feature detects resistance and reverses the desk's movement slightly. This is designed to prevent damage to the desk and nearby objects, though it's not described as highly sensitive, so care should still be taken when raising or lowering the desk.

Do I need to drill holes in my tabletop?

Yes, if using your own tabletop you will need to drill mounting holes for the frame, control panel and cable management, as these are not pre-drilled. This allows the frame to work with almost any tabletop but does require careful measuring beforehand.

Desktronic Home Pro (Black, Electric Height-Adjustable) Specs

Spec	Detail
Brand	Desktronic
Model	Home Pro
Colour	Black
Frame Material	Alloy Steel
Frame Tube Size	90mm x 60mm x 3mm
Lifting Mechanism	Electric Dual Motor
Minimum Height	62cm
Maximum Height	128cm
Height Adjustment Speed	50mm per second
Full Sit-to-Stand Time	Under 12 seconds
Maximum Weight Capacity	160kg
Noise Level	Under 40 dB
Item Weight	26kg
Item Dimensions	105cm x 26cm x 21cm
Compatible Tabletop Length	110cm to 220cm
Compatible Tabletop Width	60cm to 100cm
Control Panel	Touchscreen
Memory Presets	3
Charging Ports	USB-A and USB-C
Anti-Collision Feature	Yes
Soft Start/Stop	Yes
Drawer	1 (built-in)
Drawer Glide Mechanism	Drawer runner
Feet Type	Wide T-feet
Levelling Bolts	Yes
Mounting Type	Freestanding
Assembly Required	Yes
Recommended Assembly	1-2 people
Assembly Tools Included	Yes
Warranty	Limited (5 years with registration)
Room Type	Office